EA eDIPTFT Serielle TFT

As the first in the world we do provide TFT displays with 3.2", 4.3" and 7", which are immediately running and do provide from the first minute the full functionality. These displays do require a single supply 5V= (EA eDIPTFT32: 5V= or 3.3V=) and an interface RS-232, I²C or SPI only.

All character sets and control /graphic functions to build-up a screen are immediately available.

• no PC / embedded system necessary
• low power with max. 900mW (except 5.7" and 7": 3.5W)
• no training for a new software and programming tools necessary
• full function already immediately after power-on
• drastically reduced time-to-market
• tested functions validated hundreds of times
• unparalleled flexibility thanks to powerful commands and a variety of interfaces (RS-232, I²C, SPI)
• extremely compact construction
• and not the least important benefit: a clear price advantage compared to individualized solutions
• information flyer as a pdf file

Such as the touch key, bargraph, area, picture, animation, centered strings... are already built-in. You can therefore create the screen layout you want with just a few, easily understood commands. All the commands are based on coordinate specifications and can therefore be applied and moved to the nearest pixel.

There is a built-in self-test facility for demonstration purposes and initial testing: simply set the "Test" pin to low.

Like all EA DIP modules, the EA eDIPTFT displays are simply inserted in the PCB and soldered in place. No screws, distance sleeves or cables are required, thus saves material cost and simplifies construction. This results in a saving of between 2 and 4 minutes per module during assembly!

For a standard screw mounting (e.g. together with the optional mounting bezel), the displays do come with 2 additional mounting clips for easy screw mounting.

Additionally to the well-proved versions with a resistive touch panel currently we do provide 2 displays with 4.3" and 7" alternatively equipped with a capacitive touch panel: EA eDIPTFT43-ATC (4.3") and EA eDIPTFT70-ATC (7").

The advantage is more transperency that leads for both sizes to again more brightness and a very contrasty display. The surface is made of glass which is hard profen against scratch, it is hygienic and resistant against all cleaning stuff. The design with its black frame grants your equipment a valuable, modern optic.

An essential detail with industrial applications ist the usability with and without hand gloves. Even when the display is put behind a 3mm glass plate it may be operated perfectly.